Free shipping
Craft knife to cut extra edges
Spatula
Check your Wall
Before you begin, make sure your wall is smooth clean and dry. If your wall has some texture, the wallpaper won't stick.
Open your box and layout your panels on the floor to visualize your decor.
Remove the Back Paper
Carefully remove the back paper and stop after reaching 12 in from the top side of the panel.
You will have to start the installation from the left to the right.
Start installing your panels from the ceiling to the floor. The top part must be carefully stuck to the wall.
Installation of the First Panel
Use a spatula to paste the panel to the wall and carefully remove bubbles.
After installing the first panel, overlap the following panel, according to the pattern match.
Mural Installation and Finishes
Once your wall mural has been entirely hung, take the craft knife and cut off any extra edges at the top and the bottom of your panels. Always make sure your blade is sharp to avoid ripping the paper.
